Filter
Top Products
SiRF Star IIe/LP Bluetooth GPS GPS-6030 Operating Manual Rikaline
Rikaline International Corp. 10F, 64, Kang-Ding Road, Taipei 108, Taiwan
Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 E-Mail: info@rikaline.com.tw Web: www.rikaline.com.tw
8
3.3 Charging
Low Power The right LED(LED 1) indicator will turn RED (normally BLUE) when battery power
becomes low. Connect the receiver to a powers source to continue operation and to
recharge the battery.
Charging The left LED(LED 2) indicator will turn RED (or ORANGE) when the battery is being
charged. When fully charged, the RED indicator will switch off.
3.4 Bluetooth Communication
Waiting to connect The right LED(LED 1) indicator will flash if there is no communication between the
receiver and another device.
Connected The right LED(LED 1) indicator will turn to continuous lighting when the receiver is
connected through the wireless link with another device.
3.5 GPS
Navigating The left LED(LED 2) will flash GREEN (or ORANGE when charging) if the receiver is
able to determine the current position.
3.6 PIN CODE
The PIN code means Personal Identification Number for Bluetooth device and it is also called as Pass Key.
The Bluetooth GPS receiver has the default PIN Code, and is “0000”. Generally speaking, there are two steps
in Bluetooth connecting. One is pairing process, the other is link process. If you need PIN code to pairing and
connect, you can use the default pin code, “0000” to connect Bluetooth device. Our GPS receiver belongs to
non-safety connecting, you can use in general application to finish connecting.