Rikaline GPS-300 GPS Receiver User Manual


 
GPS-300 Operating Manual
Rikaline
Rikaline International Corp. 10F, 64, Kang-Ding Road, Taipei 108, Taiwan
Tel: ++886 2 2370 4688 Fax: ++886 2 2370 4686 E-Mail: info@rikaline.com.tw
Web: www.rikaline.com.tw
7
3. Hardware interface
3.1 Dimension
Size: 120.0(W) x 80.0 (D) x 26.0(H) (mm)
4.72"(W) x 3.15" (D) x 1.02"(H).
3.2 Hardware Interface
The GPS-300 includes a GPS receiver and constant voltage regulator in a metal box. After installation,
connect the power cable, active antenna and data cable, you will have a deluxe great GPS unit in your mobile
living facility. Any device you have for navigation, you just need to connect a suitable data cable. Then it starts
to work for you. All accessories are listed and described below:
3.3 Connector
3.3.1 DB9 Male Connector Function Definition:
Pin Signal Name
1 -GND
2 LED-
3 RS-232 RX
4 RS-232 TX
5 N/A
6 VCC +5
7 LED+
8 TTL RX
9 TTL TX
3.3.2 Power Code Specification
Cable: Dual-wire at 16AWG
Length: 300mm with lock type connector
3.3.3 Active Antenna Connector
Type: SMA female
Length: 10mm
3.3 Standard Accessories
Main Unit
Bracket
Active Antenna
Power Code
Data Cable