Razor RED 15555-RD Motorcycle User Manual


 
10
Sometimes the vehicle
doesn’t run, but other
times it does
Charger gets warm
during
use
Vehicle does not stop
when
applying the brake
Vehicle makes loud
noises or grinding
sounds
Problem Possible Cause
Solution
Loose wires or connectors
Motor or electrical switch damage
Normal response to charger use
Brakes are not adjusted properly
Chain adjustment is too tight or
too loose
Chain is too dry
Brake rotor is dragging on brake
pads (Rebellion Electric Chopper
only)
Check all wires around the motors and all connectors to make sure
they are tight.
Contact your local Razor authorized service center for diagnosis and
repair.
No action required. This is normal for some chargers and is no cause
for
concern. If your charger does not get warm during use, it does not
mean that it is not working properly.
Refer to adjusting the brakes instructions on page 4 to properly
adjust
brakes.
Refer to instructions on page 5 and 6 of this manual to properly
adjust chain and sprocket.
Apply a lubricant such as WD-40® to the chain.
Use your fi ngers to twist the calliper adjuster in either direction until
rotor is centered between pads
.
TROUBLESHOOTING GUIDE
Need Help?
V
isit
our web site
for updates and a list of authorized service centers
at
www.razor.com
or
call
t
oll-free at
866-467-2967
Monday - Friday 8:00 AM -
5
:00
PM
Pacifi c
T
ime.