Filter
Top Products
5
quill into the fork until it bottoms on the headset as shown in 2c.
Figure 2a, 2b and 2c. Inserting the handlebar quill into the fork.
Tighten the wedge securely. Using a 6mm hex key wrench, tighten
the wedge by turning the bolt clockwise as shown in Figure 3. Tighten
securely. When the wedge is properly tightened, the handlebars cannot
be twisted out of alignment with the front wheel.
Figure 3. Tighten the wedge using a 6mm allen wrench.
WARNING: Failure to properly tighten the wedge may cause the
handlebars to dislodge while riding and may cause you to lose control
and fall. When correctly tightened, the handlebars will not rotate out of
alignment with the front wheel under normal circumstances.