Filter
Top Products
12 ST7002 SmartPilot Controller Operating Guide
How do I adjust the contrast?
To set the display contrast level:
1. With the autopilot in Standby mode, press the
disp button for one second to
access the LAMP screen.
2. Press the
disp button for one second again, to display the CONTRAST
screen.
3. Use the
up and down arrow buttons to set the required contrast level (from
1 to 15).
4. The display automatically returns to the previous mode if you do not press a
button for 10 seconds:
Note:
if you press another mode button within 10 seconds you will select the mode as-
signed to that button (for example:
auto
selects Auto mode,
standby
selects Standby
mode).