Filter
Top Products
8
HOOK-AND-LOOP TAPE MOUNTING
For some dashboards, the hook-and-loop tape included with
your detector might be best for mounting. Follow these steps to
use the hook-and-loop tape.
1. Use a damp cloth to clean the bottom of the detector and
the dashboard. Let both surfaces dry.
Note:
The tape’s adhesive might not stick to a surface
treated with vinyl cleaner or protectant.
2. Remove the tape’s backing and stick the tape to the bottom
of the detector.
Note:
Do not place the hook-and-loop tape over the detec-
tor’s serial number.
On a curved dashboard, cut the supplied strip in half and
use one strip on each side of the bottom of the detector.
3. Remove the backing from the other side of the tape and
press the detector onto the dashboard.
Serial
Number