Filter
Top Products
10
Installation
HOOK-AND-LOOP MOUNTING
In some vehicles, the dashboard may be the best location to
mount the detector. For this mounting, use the supplied hook-
and-loop tape as follows.
1. Use a damp cloth to clean the bottom of the detector and
the dashboard. Let both surfaces dry.
Note:
The tape's adhesive might not stick to a surface
treated with vinyl cleaner or protectant.
2. Remove the tape's paper backing and stick the tape to the
bottom of the detector (do not cover the serial number).
Tip:
On a curved dashboard, cut the supplied strip in half
and use one strip on each side of the bottom of the detec-
tor.
3. Remove the paper backing from the other side of the tape
and press your detector onto the dashboard.
22-1686.fm Page 10 Friday, March 31, 2000 2:09 PM