Filter
Top Products
9
Installation
3. To adjust the mounting angle, remove the detector from the
bracket. Then remove the bracket from the windshield and
adjust it by carefully bending it.
HOOK-AND-LOOP MOUNTING
In some vehicles, the dashboard may be the best location to
mount the detector. For this mounting, use the supplied hook-
and-loop tape as follows:
1. Use a damp cloth to clean the bottom of the stand and the
dashboard. Let both surfaces dry.
Note:
The tape’s adhesive might not stick to a surface
treated with vinyl cleaner or protector.
2. Attach the stand to the bottom of the detector using the two
tabs on the stand. Locate the tabs over the two openings
on the detectors base and press down.
Note:
After attaching the stand, to remove it, press on the
tab until it clicks and remove the stand.