Python 1400XPL Automobile Alarm User Manual


 
25
©
2006 Directed Electronics—all rights reserved
Quick Reference Guide
To arm using your remote
To arm the system press for one second. The doors will lock (if con-
nected). The LED will begin to flash. The vehicle’s horn (if connected)
will honk and the parking lights will flash once to confirm arming.
To disarm using your remote
To disarm the system press for one second. The doors will unlock (if
connected). The vehicle’s horn (if connected) will honk twice and the
parking lights will flash twice.
Disabling the Failsafe
®
Starter Kill without a transmitter
Turn on the ignition. Press and release the Valet button within 10 sec-
onds. The LED will stop flashing and the vehicle should start.
To remote start the vehicle
Press twice within 3 seconds. The parking lights will turn on (if con-
nected) and the vehicle will start and run for the programmed duration.
To enter or exit Valet Mode
Turn the ignition to the "ON" position. Turn the ignition back off. Press
and release the Valet button within 10 seconds. The status LED will light
steadily if you have entered Valet Mode. To exit Valet Mode, repeat the
steps above. The LED will turn off when exiting Valet Mode.
To activate Panic Mode
Press and hold for 1.5 seconds.
To activate Timer Mode
Press and to start the vehicle, and run it for the set duration.
To activate Turbo Mode
Park the vehicle and set parking brake. Remove your foot from the brake pedal
and leave the engine running. Press and release the and buttons.
To disable the remote start system
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Shutdown Switch______________________________
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.