Filter
Top Products
73
MAINTENANCE
Carburetor
Water/Sediment Trap Service
Most Polaris snowmobiles contain patented carburetor bowl water/sedi-
ment traps located at the bottom of each carburetor. The trap, consisting
of a hose with a plug, should be drained about every 1000 miles (1600
km) and inspected for contamination.
Plug Cleaning Procedure
1. Turn the fuel valve off.
2. Position a container or shop towels to
catch the contaminated gasoline.
3. Slide the clamp away from the drain
plug and remove the drain plug from the
sediment tube.
4. Wipe residue from the plug and reinstall
it. Reposition and tighten the clamps.
Continue until all the traps have been
emptied.
WARNING
When draining the traps, fuel spillage will occur. Always work in a well venti-
lated area away from anything that may cause the fuel to ignite, such as open
flames, sparks, heaters, trouble lights, cigarettes, etc. Review the gasoline
warnings found on page 49.
Clamp
Drain
Plug