Filter
Top Products
71
PRE-RIDE INSPECTIONS
Start the Engine and Check
n Engine Stop Switch
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.
n Ignition Switch
Make sure the engine stops when the ignition switch is turned to OFF.
n Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
n Mirror Adjustment
If equipped, adjust your mirrors so they can be used to their full advan-
tage.
n Operating Area
Before driving away, check your surroundings. Be aware of obstacles
and make sure bystanders are a safe distance from the snowmobile.
n Tip-Over Inspections
In the event of a tip-over or rollover, check the oil level before operating
the snowmobile.
NOTICE: Failure to check the oil after a tip-over can result in serious engine
damage. Always check the oil level before operating a snowmobile
that has tipped over or rolled over.
In the event of a tip-over or rollover, the engine will stop. To restart the
engine, turn the key to the OFF position, then restart.
WARNING! Operating a snowmobile with accident damage can result in
serious injury or death. Do not operate the snowmobile if vehicle components
have been damaged in a collision or tip-over. Have the snowmobile inspected by
an authorized Polaris dealer.