Filter
Top Products
139
MAINTENANCE
Toe Alignment (cont.)
2. Place stands in front of the machine, perpendicular to the rear tires.
3. Tie an elasticstring aroundthe stands,making sure string justtouches sidesurface
of the rear tires on each side of machine and goes around the stands in front of
the machine.
4. Measure from string to rim at front and rear of front rim. Rear rim measurement
should be 1/16″ -1/8″ (.2 to .3 cm) more than front rim measurement.
5. If this measurement needs to be adjusted, contact your dealer for service.