Filter
Top Products
75
MAINTENANCE AND LUBRICATION
Transmission Oil
The transmission oil level should be checked every six months or 1000
miles (1600 km), whichever comes first. Transmission oil should be
changed annually. We recommend the use of Polaris AGL Synthetic
Gearcase Lubricant. See page 109 for the part numbers of Polaris
products.
Oil Check
The transmission oil fill plug (1) is located on the right side of the ATV
behind the footwell.
1. To access the fill plug, remove
the four screws on the footwell
and gently pull outward to
remove the footwell.
2. Remove the fill plug and check
the oil level. Maintain the oil at
the bottom of the fill hole
threads.
Oil Change
3. Remove the transmission drain
plug (2). Drain the oil into a
drain pan and dispose of properly.
4. Clean and reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
5. Remove the fill plug and add 13.5 oz. (399 ml) of the
recommended transmission oil. Maintain the level at the bottom of
the fill hole threads.
6. Replace the fill plug and check for leaks.
7. Reinstall the footwell and screws.
1
2