Filter
Top Products
73
MAINTENANCE AND LUBRICATION
Oil Check
The oil dipstick and fill tube (1) are located on the left side of the
vehicle.
1. Position the ATV on a level surface.
2. Start the engine and let it idle for
20-30 seconds, then stop the
engine.
3. Lift the lever lock (2) to remove
the dipstick. Wipe it dry with a
clean cloth.
4. Reinstall the dipstick completely,
but do not lock it. The dipstick
must be screwed completely in to
keep the angle and depth of the
stick consistent.
5. Remove the dipstick
and check the oil level.
Maintain the oil level
in the safe range (3).
Do not overfill.
NOTE: Due to the
dipstick entry angle into
the crankcase, the oil level
will read higher on the
bottom side of the dipstick.
Always read the level on the
upper surface (4) of the dipstick.
6. After reinstalling the dipstick, be
sure to seat the lever lock.
1
SAFE
ADD8 OZ
2
3
4