Filter
Top Products
137
MAINTENANCE
Toe Alignment (cont.)
2. Place stands in front of the machine, perpendicular to the rear tires.
3. Tie an elastic string around the stands, making sure string just touches side
surface of therear tires on each side of m achine and goesaround thestands
in front of the machine.
4. Measure from string to rim at front and rear of front rim. Rear rim measure-
ment should be 1/16″ -1/8″ (.2 to .3 cm) more than front rim measurement.
5. If this measurement needs to be adjusted, contact your dealer for service.