Filter
Top Products
99
RIDING
1. Determine water depths and current.
2. Choose a crossing where both banks have gradual inclines.
3. Proceed slowly, avoiding rocks and obstacles if possible.
4. After crossing, dry the brakes by applying light pressure to the levers until braking
action is normal. If you do not perform this procedure, your brakes may be ineffec-
tive.
D Avoid operating the ATV through deep or fast flowing water. If you cannot avoid
water which exceeds the recommended maximum depth, go slowly, balance
your weight carefully, avoid sudden movements, maintain a slow and steady for-
ward motion. Do not make sudden turns or stops and do not make sudden
throttle changes.
NOTE: If the vehicle is run in water, it is critical the machine is serviced as out-
lined in the maintenance chart beginning on page 117. The following areas need
special attention: engine oil, transmission oil, front and rear gearcases, and all
grease fittings.