Filter
Top Products
38
FEATURES AND CONTROLS
Light Switches
The light switch is located on the left
handlebar (1). It’s used to turn the
lights on and off and to switch the
lights from high beam to low beam.
NOTE: The lights won’t work unless
the key is in the ON position and the
shut-off switch is in the RUN position.
Indicator Lights
With the engine running, verify the function of all indicator lights each
time the ATV is used.
NOTE: The taillight is on whenever the main switch (key) is on.
Turn the key off to prevent battery drain.
1. Transmission Neutral Indicator
2. Transmission Reverse Indicator
3. HighTempWarning(displays if engine overheats)
Operating the ATV on streets or roads, especially in darkness,
could result in an ac cident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It’s
designed for and must be used for off-road use only.Use
caution and drive at reduced speeds in conditions of reduced
visibility such as fog, rain and darkness.
WARNING
1
1
2
3