Filter
Top Products
78
MAINTENANCE AND LUBRICATION
Periodic Maintenance Schedule
Item Hours/
Miles
Frequency Remarks
Carburetor float
bowl
50 hrs. 6 months Drain bowl periodically and
prior to storage
J Throttle Cable/ETC
Switch
50 hrs. 6 months Inspect; adjust; lubricate;
replace if necessary
L
Choke (enricher)
cable
50 hrs. 6 months Inspect; adjust; lubricate;
replace if necessary
Coolant strength/
pressure test sys-
tem
100 hrs. 6 months Inspect strength seasonal-
ly; pressure test system
annually
" Front hubs/fluid
check (AWD)
50 hrs. 6 months Check monthly
Shift linkage 50 hrs. 6 months Inspect; adjust
J Drive belt 50 hrs. 6 months Inspect; replace as needed
" Steering 50 hrs. 6 months Inspect daily; lubricate
" Front suspension 50 hrs. 6 months Inspect; lubricate; tighten
fasteners
" Rear suspension 50 hrs. 6 months Inspect; tighten fasteners
" Drive chain(s) 50 hrs. 6 months Inspect daily; adjust and lu-
bricate if needed
L
Spark plug 100 hrs. 12 months Inspect; replace as needed
" Rear axle 50 hrs. 6 months Inspect bearings; lube
J
L
Ignition Timing 100 hrs. 12 months Inspect; adjust as needed
Improperly performing the procedures marked with a J could result
in component failure and lead to serious injury or death. Hav e an
authorized Polaris dealer per form these services.
WARNING