35
FEATURES AND CONTROLS
Brake Pedal
Depress the brake pedal to slow or stop
the vehicle. Apply the brakes while start-
ing the engine.
Throttle Pedal
Push the pedal down to increase engine
speed. Spring pressure returns the pedal
to the rest position when released.
Always check that the throttle pedal
returns normally before starting the
engine.
This vehicle is equipped with a throttle
release switch, which is designed to
reduce the risk of a frozen or stuck throttle. If the throttle cable should
stick in an open position when the operator releases the throttle pedal,
engine speed will be limited, and power to the rear wheels will be
reduced.
Rollover Protective Structure (ROPS)
The Rollover Protective Structure (ROPS) on this vehicle meets OSHA
1928.53 rollover performance requirements. Always have your autho-
rized POLARIS dealer thoroughly inspect the ROPS if it ever becomes
damaged in any way.
No device can assure occupant protection in the event of a rollover.
When used with seat belts and cab nets, the ROPS helps prevent
occupants from being ejected from the vehicle. Always follow all safe
operating practices outlined in this manual to avoid vehicle rollover.
WARNING! Vehicle rollover could cause severe injury or death. Always avoid
operating in a manner that could result in vehicle rollover.
Throttle
Pedal
Brake
Pedal
ROPS Label