Filter
Top Products
7.40
FINAL DRIVE
9923142 - 2011 RANGER RZR / RZR S / RZR 4 Service Manual
© Copyright 2010 Polaris Sales Inc.
Gearcase Assembly
1. Install a new input shaft seal using a standard seal installer
or other suitable method.
2. Install new seals on each side of the gearcase housing using
a standard seal installer or other suitable method. Install a
new O-ring in the gearcase cover.
3. If removed, install each axle spool bearing race using
standard bearing installation tools and an arbor press.
WARNING
Wear the appropriate safety equipment while
installing bearing races to
reduce the risk of injury.