Filter
Top Products
74
OPERATION
Starting a Cold Engine
1. Place the transmission in neutral, lock the parking brake
and disengage the clutch. Make sure the fuel valve is on.
2. Sit on the ATV and pull the choke knob (1) out until it
stops. NOTE: If the knob doesn’t stay where positioned,
increase the tension by rotating the tension adjusting nut
clockwise.
Engine exhaust contains poisonous
carbon monoxide and can cause loss
of consciousness resulting in severe
injury or death. Never run an engine
in an enclosed area.
WARNING
Operating the vehicle immediately
after starting could cause engine
damage. Allow the engine to warm
up for several minutes before
operating.
CAUTION
1