Filter
Top Products
1
2
73
MAINTENANCE AND LUBRICATION
Transmission Oil
Gearcase Lubricant Capacity Fill Plug
Torque
Drain Plug
Torque
Transmission
2x4
Premium AGL Synthetic
Gearcase Lubricant
15.2 oz.
(450 ml)
15 ft. lbs.
(20 Nm)
15 ft. lbs.
(20 Nm)
Transmission
4x4
Premium AGL Synthetic
Gearcase Lubricant
20.3 oz.
(600 ml)
15 ft. lbs.
(20 Nm)
15 ft. lbs.
(20 Nm)
Always check and change the
transmission oil at the intervals
outlined in the Periodic Maintenance
Chart beginning on page 64.
Maintain the oil level at the bottom
of the fill plug hole.
The transmission fill plug (1) is
located on the left side of the
ATV, under the rear fender, behind
the wheel. The drain plug (2) is
located behind the wheel well.
See page 112 for the part numbers of
Polaris products.
Oil Check
1. Position the vehicle on a
level surface.
2. Place the transmission in
gear.
3. Lock the parking brake.
4. Remove the fill plug. Use
a 15mm wrench.
5. Check the oil level.
6. Add the recommended oil
as needed. Do not overfill.
7. Reinstall the fill plug.
Torque to specification.
HNR