Filter
Top Products
83
MAINTENANCE
Lubrication Recommendations
Check and lubricate all components at the intervals outlined in the Peri-
odic Maintenance Chart beginning on page 79. Items not listed in the
chart should be lubricated at the General Lubrication interval.
The a-arms and lower control arms are lubricated at the factory, and no
additional lubrication will be needed. However, if these components are
subjected to severe use, grease zerks have been provided for additional
lubrication at the user's discretion.
Item Lube Method
Engine Oil PS-4 5W-50 4-Cycle Oil See page 84.
Brake Fluid DOT 4 Brake Fluid See page 31.
Transmission Oil AGL Gearcase Lubricant &
Transmission Fluid
See page 87.
Demand Drive Fluid
(Front Gearcase)
Demand Drive Fluid See page 88.
Middle Gearcase Oil ATV Angle Drive Fluid (or
GL5 80-90 weight gear lube)
See page 91.
Rear Gearcase Oil See page 90.
ADC Fluid Demand Drive Fluid See page 92.
Front Prop Shaft Yoke U-Joint Grease Grease fittings (3 pumps maxi-
mum) every 500 miles, before long
periods of storage, or after pres-
sure washing or submerging
Front Prop Shaft Yoke