Filter
Top Products
77
Operation
Turning Around on a Hill
7. With the front brakes applied, pull in the
clutch lever. Use the brakes to slowly allow
the vehicle to roll around to your right until it's
pointing across the hill or slightly downward.
8. With the front brakes still applied, release the
clutch lever and lock the parking brake.
Remount from the uphill side, keeping body
weight uphill.
9. Pull in the clutch lever, shift into neutral and
restart the engine.
10. Release the parking brake and slowly release
the clutch lever, allowing the ATV to proceed
slowly. Stay in first gear, using the brakes for
additional speed control if necessary, until more level ground is reached.
11. Follow proper procedures for driving downhill. See page 75.
8 ft. (2.4 m)