Filter
Top Products
147
Maintenance
Toe Alignment
4. Measure the distance between the marks
and record the measurement (1).
5. Move the vehicle until the chalk marks
are at the rear of the tires, even with the
hub/axle center line.
6. Measure the distance between the marks
and record the measurement (2).
7. Subtract measurement 2 from measure-
ment 1. The difference is the vehicle toe
alignment.
8. The recommended toe alignment is 0" to
1/16" (0-1.6 mm) toe out. This means
that the front measurement should be 0" to 1/16" (0-1.5 mm) greater than the rear mea-
surement.
9. If you discover improper alignment, see your Polaris dealer for service.
1
2