Polaris 9922479 Offroad Vehicle User Manual


 
141
Maintenance
Throttle Cable Freeplay Adjustment
Improper adjustment of throttle cable freeplay can result in loss of control, which could result in serious
injury or death. Polaris recommends that this procedure be performed by a Polaris dealer to ensure
that it's done correctly. Mechanically knowledgeable persons who perform this procedure must follow
the adjustment procedures exactly.
1. Locate the throttle cable at the handlebar.
2. Slide the boots off the inline cable adjuster
sleeve and loosen the locking nut.
3. Turn the adjuster until 1/16" to 1/8" (1.5-3 mm)
freeplay is achieved at the thumb lever. While
adjusting freeplay, be sure to flip the throttle
lever back and forth.
4. Tighten the locknut and slide the boots over the cable adjuster until they touch at the
midpoint of the adjuster.
WARNING
Boot Boot
Sleeve
Locking Nut