Filter
Top Products
101
Maintenance
Engine Oil Change
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to idle for two to three minutes. Stop the engine.
3. Place a drain pan beneath the crankcase. Remove the drain plug. Allow the oil to drain
completely.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
4. Clean the crankcase sealing surface and the
drain plug (with magnet) thoroughly.
5. Replace the sealing ring. Reinstall the drain
plug. Torque to 15 ft. lbs. (20 Nm).
Drain
Plug