Filter
Top Products
40
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 29
66
Brake fluid Ensure proper level 31
Auxiliary brake Ensure proper operation 30
Front suspension Inspect, lubricate if necessary 61
Rear suspension Inspect, lubricate if necessary 61
Steering Ensure free operation -
Tires Inspect condition and pressure 71
Wheels/fasteners Inspect, ensure fastener tightness 71
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 33
62
Throttle Ensure proper operation 28
69
Indicator lights/switches Ensure operation 26
Engine stop switch Ensure proper operation 26
Drive chain Check condition/slack, lubricate as
needed
77
Air filter, pre-filter Inspect, clean 74
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
27
81
Brake light/tail lamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
82
Riding gear Wear approved helmet, goggles, and
protective clothing
8