72
MAINTENANCE
Engine Oil
Oil and Filter Change
1. Position the vehicle on a level
surface.
2. Place the transmission in PARK.
3. Start the engine. Allow it to idle
for 30 seconds.
4. Stop the engine.
5. Clean the area
around the drain
plug.
6. Place a drain pan
under the oil tank.
7. Remove the drain
plug.
8. Drain the oil.
9. Clean the drain plug. Reinstall the drain
plug with a new sealing washer.
10. Torque to specification. See page 70.
CAUTION
Hot oil may result in serious burns. Do not allow hot oil to contact skin.
Drain
Plug
New Sealing Washer
Screen
Fitting