Filter
Top Products
34
FEATURES AND CONTROLS
Instrument Cluster
Rider Information Center
Standard Modes
Use the MODE button to toggle through the mode options. The reverse
override button is also the MODE button. See page 20.
NOTE: The transmission cannot be in reverse when using this feature.
Odometer Mode
The odometer records the miles or kilometers traveled by the Quadricy-
cle.
Trip Meter Mode
The trip meter records the miles or kilometers traveled by the Quadricy-
cle on each trip if it's reset before each trip. To reset the trip meter, select
the trip meter mode. Press and hold the mode button (override button)
until the total changes to 0.
NOTE: In the Rider Information Center, the trip meter display contains a deci-
mal point, but the odometer displays without a decimal point.
Hour Meter Mode
This mode logs the total hours the engine has been in operation.
Tachometer Mode
The engine RPM is displayed digitally.
NOTE: Small fluctuations in the RPM from day to day may be normal because
of changes in humidity, temperature and elevation.
Clock Mode
The clock displays time in a 12-hour format. To reset the clock, see page
35.