Filter
Top Products
54
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Passenger seat lock-out Ensure proper operation 40
Brake system/lever travel Ensure proper operation 31
95
Brake fluid Ensure proper level 32
Auxiliary brake Ensure proper operation 34
Front suspension Inspect, lubricate if necessary 81
Rear suspension Inspect, lubricate if necessary 81
Steering Ensure free operation -
Tires Inspect condition and pressure 98
Wheels/fasteners Inspect, ensure fastener tightness 98
99
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 39
82
Coolant level Ensure proper level 93
94
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 30
118
Indicator lights/switches Ensure operation 28
Engine stop switch Ensure proper operation 28
Air filter, pre-filter Inspect, clean 100
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
29
102
Brake light/taillight Check operation, apply Polaris dielec-
tric grease when lamp is replaced
105
Riding gear Wear approved helmet, goggles, and
protective clothing
8
ADC Fluid Ensure proper level 90