Polaris 9922051 Offroad Vehicle User Manual


 
41
FEATURES AND CONTROLS
Passenger Seat
Seat Conversion
5. Lift the adjustment latch at the top of the passenger backrest. Raise
the backrest to the desired position. Release the latch, making sure
it locks into one of the three operating positions.
Tip: The backrest must be moved out of the lowest position before it can be
secured in the upright position. The lowest position is for seat storage only.
Do not leave the backrest in the lowest position. Always adjust the backrest
to one of the three operating positions.
6. Lower the operator
backrest to create the
passenger seat. Two
retaining pins under the
seat should fit into the two
grommets on the seat base.
7. Test the passenger seat
lock-out by attempting to
release the cargo box dump
lever. If the dump lever
releases, the seat is not
secure. Repeat the set-up
procedure. If the lock-out
is not working properly, do
not allow a passenger to
ride the vehicle. See your Polaris dealer for service.
8. To return the vehicle to single-rider
operation, reverse all steps. Always
lower the passenger backrest to the
lowest position before folding it
down into the cargo box. Turn the
operator backrest latches 1/4 turn to
secure the locks.
Passenger
Backrest
Adjustment
Latch
Locked