Filter
Top Products
48
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 29
85
Brake fluid Ensure proper level 30
Auxiliary brake Ensure proper operation 32
Front suspension Inspect, lubricate if necessary 71
Rear suspension Inspect, lubricate if necessary 71
Steering Ensure free operation -
Tires Inspect condition and pressure 88
Wheels/fasteners Inspect, ensure fastener tightness 89
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 33
72
Coolant level (if applicable) Ensure proper level 83
84
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 28
118
Indicator lights/switches Ensure operation 26
Engine stop switch Ensure proper operation 27
Air filter, pre-filter Inspect, clean 90
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply Polaris dielec-
tric grease when lamp is replaced
27
92
Brake light/taillight Check operation, apply Polaris dielec-
tric grease when lamp is replaced
95
Riding gear Wear approved helmet, goggles, and
protective clothing
8
ADC Fluid Ensure proper level 81