Filter
Top Products
85
MAINTENANCE
Lights
Poor lighting can result in reduced visibility when driving. Headlight
and taillight lenses become dirty during normal operation. Clean lights
frequently and replace burned out lamps promptly. Always make sure
lights are adjusted properly for best visibility.
Headlamp Replacement
When servicing a halogen lamp, don't touch the lamp with bare fingers.
Oil from your skin leaves a residue, causing a hot spot that will shorten
the life of the lamp.
1. Turn the back of the headlight
harness counterclockwise and
pull the harness assembly away
from the headlight assembly.
CAUTION! Hot components can cause
burns to skin. Allow lamps to cool before
servicing.
2. Remove the headlamp and install
the new headlamp.
3. Reinstall the harness assembly
into the headlight assembly.
4. Turn the headlight harness clockwise to secure the headlamp.
Taillight/Brakelight Lamp Replacement
1. From the rear of the brake-
light, remove the two
screws holding the lens
cover in place. Remove the
lens cover.
2. Remove the lamp and
replace it with a new lamp.
3. Test the light for proper
operation.
4. Reinstall the lens cover.
Harness
Screw
Lamp
Cover