Filter
Top Products
81
MAINTENANCE
Transmission Oil
Always check and change the transmission oil at the intervals outlined
in the Periodic Maintenance Chart beginning on page 70. Maintain the
oil level at the bottom of the fill plug hole threads. We recommend the
use of Polaris Premium AGL Synthetic Gearcase Lubricant. See page
126 for the part numbers of Polaris products.
Access the transmission fill plug from the right side of the vehicle.
Access the drain plug from the left side of the vehicle.
Oil Check
1. Position the vehicle on a level sur-
face.
2. Remove the propshaft shield from
the right side of the vehicle.
3. Remove the fill plug.
4. Check the oil level. Add the recom-
mended gearcase oil as needed to
bring the level to the bottom of the
fill hole threads.
5. Reinstall the fill plug. Torque to 14
ft. lbs. (19 Nm).
6. Reinstall the propshaft shield.
Oil Change
1. Position the vehicle on a level sur-
face. Remove the propshaft shield
from the right side of the vehicle.
2. Place a drain pan under the gearcase.
3. Remove the drain plug. Allow the oil
to drain completely.
4. Clean the drain plug. Install a new sealing washer on the drain plug.
5. Reinstall the drain plug. Torque to 14 ft. lbs. (19 Nm).
6. Remove the fill plug. Add the recommended oil. See page 124 for
capacities.
7. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm).
8. Check for leaks.
9. Reinstall the propshaft shield.
10. Dispose of used oil properly.
Fill
Plug
Drain Plug