Filter
Top Products
35
FEATURES AND CONTROLS
Switches
Engine Stop Switch
Move the stop switch to the center
(OFF) position to stop the engine
quickly. The stop switch provides the
operator with a quick means of engine
shutdown in case of stuck throttle or
other emergency. The engine will not
start or run when the switch is off.
NOTE: The taillight is on whenever the main key switch is on. Turn the main
key switch off to prevent battery drain.
Main Key Switch
Turn the main key switch off to stop the engine. To start the engine,
slide the stop switch to the center RUN position and turn the main key
switch clockwise past the ON position. Release the key when the engine
starts.
Headlight Switch
Use the headlight switch to turn the lights on and off and to change the
lights from high beam to low beam.
NOTE: The lights won't work unless the key is in the ON position.
WARNING
Operating the ATV on streets or roads, especially in darkness, could result in
an accident and serious injury or death.
Your ATV is not equipped with highway-approved lights. It's designed for and
must be used for off-road use only. Use caution and drive at reduced speeds
in conditions of reduced visibility such as fog, rain and darkness.
OFF OFFON