Filter
Top Products
61
THE PERFECT FIT
FAST M-10 Rear Suspension Adjustments
M-10 Static Sag and Ride Height Settings
Rear Spring Preload
If FRA position alone does not allow the setup of the proper amount of
sag, the center retainer of the rear track shock can be replaced with
optional retainers to adjust the preload and change the sag. See your
Polaris dealer for assistance.
NOTE: Whenever ordering any of the retainers listed in the chart,
always order the retainer insert as well. The insert is not remov-
able once installed, so a new insert is needed when installing a
new retainer.
OPTIONAL RETAINERS
Retainer Insert
Part Number
Retainer Part Number Preload Sag
5436109
5135077
(standard on M-10 128)
Least Most
5134923 Middle Middle
5135080
(standard on M-10 136)
Most Least