Filter
Top Products
41
FEATURES
Instrumentation
MFD Digital Display Programs
History Program
The History Program automatically displays electrical system voltage
level and fuel level (if equipped).
While in the History mode, press the SET button to view maximum
vehicle speed, maximum engine rpm or the current service interval set-
ting. The gauge automatically logs the maximum speed and engine rpm
even if the History Program is not currently displayed.
The History Program will display the history of the Maximum Speed,
Maximum RPM and Service Interval settings.
Maximum Speed/RPM Reset
While in either the MAX MPH or the MAX
RPM mode, press and hold the SET button
for three seconds to reset the recorded maxi-
mum values for both MPH and RPM. Both
of these values are reset at the same time.
Reset the MAX MPH/RPM values before
each run to obtain accurate readings.
NOTE: Due to electrical noise, the MFD
may occasionally display MAX
MPH/RPM values that are not rep-
resentative of actual values.