Polaris 6x6 Offroad Vehicle User Manual


 
35
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 24
79
Brake fluid Ensure proper level 79
Front suspension Inspect, lubricate if necessary 62
Rear suspension Inspect, lubricate if necessary 62
Steering Ensure free operation 80
Tires Inspect condition and pressure 81
Wheels/fasteners Inspect, ensure fastener tightness 81
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 30
63
Coolant level Ensure proper level 73
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 78
Indicator lights/switches Ensure operation 23
Air filter, pre-filter Inspect, clean 76
Air box sediment tube Drain deposits whenever visible 76
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
83
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
83
Seat Belts Check length of belt for damage, check latches for
proper operation
27
Cab nets (or doors) Check for wear or damage, ensure proper installation 26