Filter
Top Products
25
FEATURES AND CONTROLS
Park Brake Lever
To help prevent the vehicle from rolling, engage the
park brake when parking the vehicle. When the park
brake is fully engaged, “BRAKE” appears in the rider
information display. Engine speed is limited to 1300
RPM in all gears, except neutral. If throttle is applied,
this limiting feature prevents operation, which protects
the park brake pads from excessive wear.
Tip: This feature will not operate properly if the park brake connector or switch (under the hood)
malfunctions or becomes disconnected, or if the switch has moved. Check for disconnection, then
see your dealer promptly if this feature fails to operate properly.
Inspect and adjust park brake cable tension after the first 25 hours of operation and every 100
hours thereafter to ensure proper cable tension. See page 80.
Always apply the service brakes before engaging or
releasing the park brake.
1. Apply the brakes.
2. Pull the park brake lever downward as far as
possible.
3. To release the park brake, apply the brakes. Press
the park brake release inward and move the lever
upward as far as possible.
WARNING! Operating the vehicle while the park brake is
engaged could cause loss of control and result in serious
injury or death. Always disengage the park brake before
operating the vehicle.
Trip 1
km
mi
RPM
FE
88
:
88