Filter
Top Products
41
THE PERFECT FIT
Suspension Quick Set-Up Guide
Polaris recommends that riders use this Quick Set-Up Guide to make
any adjustments for rider weight and trail conditions. If additional tun-
ing is needed after you have exhausted all possible adjustments to the
rear shock spring and clicker, refer to the information on the following
pages of this manual.
Factory Suspension Settings
IFS and Front Track Shock
IFS Shock Clicker 6 clicks clockwise from full soft
IFS Shock Spring Preload 3 3/4" (9.5 cm) from body end to retainer
Front Track Shock Clicker 2 clicks clockwise from full soft
Front Track Shock Spring Preload 1 1/4" (3.2 cm) from body end to retainer
Stock 190 Rear Spring
Rear Shock Clicker 4 clicks clockwise from full soft
Rear Shock Spring Preload See Optional Spring Guide (page 40)
Accessory Spring Recommended Initial Settings
Accessory 120 Rear Spring
Rear Shock Clicker 4 clicks clockwise from full soft
Rear Shock Spring Preload See Optional Spring Guide (page 40)
Accessory 260 Rear Spring
Rear Shock Clicker 4 clicks clockwise from full soft
Rear Shock Spring Preload See Optional Spring Guide (page 40)