Filter
Top Products
43
FEATURES
Instrumentation
MFD Digital Display Programs
Engine Program
The Engine Program automatically displays the engine coolant tempera-
ture, engine hours, electrical system voltage level and fuel level (if
equipped). On machines equipped with altimeter sensor and ambient air
temperature sensors, altitude and ambient air temperature will display as
additional screens in the engine program. Press the SET button to dis-
play the ambient air temperature and altitude screens. Use the following
procedures to make changes to these screens.
Hour Meter
The hour meter records the total hours of
engine operation since manufacture. This
meter cannot be reset.
Engine Temperature
A thermometer measures water temperature,
giving an indication of engine temperature.
Air Temperature (if equipped)
The MFD displays actual air temperature in
either standard or metric units.
1. Enter the Engine Program.
2. Press and hold the MODE switch for ten
seconds to switch between standard and
metric units of measurement.