Filter
Top Products
38
THE PERFECT FIT
Edge Rear Suspension Adjustments
Rear Shocks
Indy Select Rear Shock
Some snowmobiles are equipped with the Indy S elect rear shock,
which allows for adjustments to the compression valving by turning
the adjustment screw located near the base of the shock.
Locate the adjustment screw (A) near the base of the shock. In
half-turn increments, turn the screw clockwise to increase compression
valving and stiffen the ride, or counterclockwise to reduce compression
and soften the ride. There are approximately three full turns of
adjustment available.
If bottoming continues after the screw has been turned fully clockwise,
the torsion spring should be adjusted (see page 37). Return the screw
to its original starting position after the t orsion spring has been
tightened.
A