Filter
Top Products
43
FEATURES AND CONTROLS
Instrument Cluster
Your ATV is equipped with an instrument cluster that senses vehicle
speed from a gear in the transmission. The instrument cluster measures
distance in miles/kilometers as well as hours of operation.
In addition to showing vehicle speed, the instrument cluster also dis-
plays the following items: engine speed, odometer, resettable trip meters
(2), total engine hours of operation, service interval timer and indicator,
gear position, fuel level, AWD status, EPS status (if equipped), high
beam status, battery voltage warning, temperature warning and diagnos-
tic display mode. These features are outlined on the following pages.
NOTICE: High water pressure may damage ATV components. Wash the ATV
by hand or with a garden hose using mild soap.
Certain products, including insect repellents and chemicals, will
damage the speedometer lens and other plastic surfaces. Do not use
alcohol to clean the instrument cluster. Do not allow insect sprays to
contact the lens. Immediately clean off any gasoline that splashes on
the instrument cluster.
Rider Information Center
Directional
Indicator
High Beam
Indicator
Neutral
Indicator
Over-Temperature
Indicator
EPS Warning
Indicator
(if equipped)