Filter
Top Products
36
FEATURES AND CONTROLS
All Wheel Drive System
The All Wheel Drive system is
controlled by the 4X4 switch.
ADC 4X4 Mode
When the switch is on ADC 4X4,
the ADC system allows engine
braking to all four wheels when the
vehicle descends a hill or incline.
Always move the 4X4 switch to
ADC 4X4 before ascending or
descending a hill. See page 38.
4X4 Mode
When the switch is on 4X4, the
ATV is in 4X4, and the 4X4 indica-
tor light in the instrument cluster
will be on.
When in 4X4, the demand drive
unit will automatically engage any
time the rear wheels lose traction.
When the rear wheels regain trac-
tion, the demand drive unit will
automatically disengage. There is
no limit to the length of time the
vehicle may remain in 4X4.
Tip: The override switch allows activation of 4X4 in reverse if the 4X4 switch is
on. See page 28.
4X4 Switch
ADC 4X4