Polaris 500 X2 Offroad Vehicle User Manual


 
73
MAINTENANCE
Lubrication Guide
Check and lubricate all components at the intervals outlined in the
Periodic Maintenance Chart beginning on page 69. Items not
listed in the chart should be lubricated at the General Lubrication
interval.
NOTE: The a-arms and upper control arms are lubricated at the factory, and
no additional lubrication will be needed. However, if these components
are subjected to severe use, grease zerks have been provided for
additional lubrication at the user's discretion.
Item Lube Capacity at
Fluid Change
Method
Engine Oil PS-4 PLUS Performance
Synthetic 2W-50
2 qt. (1.9 l) See page 74.
Brake Fluid DOT 4 Only --- See page 88.
Transmission Oil Polaris AGL Synthetic
Gearcase Lube
32 oz. (948 ml) See page 80.
Demand Drive
Fluid (Front
Gearcase)
Demand Drive LT Pre-
mium Fluid
9.3 oz. (275 ml) See page 82.
ADC Fluid Polaris ADC Fluid --- See page 84.
Front Prop Shaft
Yoke
Polaris Premium U-Joint
Lube
--- Grease fittings (3
pumps maximum)
every 800 km, before
long periods of stor-
age, or after pressure
washing or submerg-
ing.
Front Prop Shaft Yoke