Polaris 500 X2 Offroad Vehicle User Manual


 
103
MAINTENANCE
Lights
Taillight/Brakelight Lamp Replacement
1. Open the tailgate.
2. Remove the two screws near the tail-
gate latch.
3. Grasp the entire taillight assembly
and pull it away from the vehicle.
4. Remove the harness connector from
the back of the light assembly.
5. Turn the lamp counterclockwise to
remove it.
6. Apply dielectric grease to the socket and
install the new lamp.
7. Reinstall the harness connector.
8. Test the light for proper operation.
9. Reinstall the taillight assembly. Reinstall
the two screws.
Fuse Replacement
If the engine stops or will not start, or
if you experience other electrical fail-
ures, a fuse may need replacement.
NOTE: Spare fuses are provided in a
compartment on the top of the
access door.
1. Open the front box cover.
2. Open the access door.
3. Remove the suspect fuse from the
fuse panel. Install a new fuse with
the same amperage.
4. Secure the access door.
5. Secure the box cover.
Screws
Lamp
Fuse Panel
Fuses
5or61520 20