Polaris 500 EFI X2 Offroad Vehicle User Manual


 
38
FEATURES AND CONTROLS
Switches
Mode/Reverse Override Switch
This vehicle is equipped with a reverse speed limiter system.To gain
additional power while backing, depress the override switch.
NOTE: The override switch also allows activation of 4X4 in reverse, if the 4X4
switch is on. This switch is also used to toggle through the modes of
the rider information center. See page 52.
Engine Stop Switch
Move the stop switch either left or right to
the OFF position to stop the engine quickly.
The engine will not start or run when the
switch is off.
NOTE: Both the main switch and the engine stop switch will shut off all electri-
cal power to the vehicle, including lights.
Main Key Switch
Use the main key switch to start the engine. See page 63.
4X4 Switch
Use the 4X4 switch to engage ADC 4X4, 4X4 or 2X4. See page 49.
WARNING
Activating the override switch while the throttle is open can cause loss of
control, resulting in severe injury or death. Do not activate the override switch
while the throttle is open.
Mode/Reverse
Override
Switch
Worklight
Switch
(if equipped)
Main Key Switch
Engine
Stop Switch
Headlight
Switch
4X4
Switch
Differential
Switch
OFF OFFRUN