Polaris 500 EFI X2 Offroad Vehicle User Manual


 
115
MAINTENANCE
Lights
Lower Headlamp Replacement
1. Turn the back of the headlight
harness counterclockwise and
pull the harness assembly away
from the headlight assembly.
2. Remove the headlamp and install
the new headlamp.
3. Reinstall the harness assembly
into the headlight assembly.
4. Turn the headlight harness clock-
wise to secure the headlamp.
Taillight/Brakelight/Worklight (if equipped) Lamp
Replacement
1. Open the tailgate.
2. Remove the two screws near the
tailgate latch.
3. Grasp the entire taillight assembly
and pull it away from the vehicle.
4. Remove the harness connector
from the back of the light assem-
bly.
5. Turn the lamp counterclockwise to
remove it.
6. Apply dielectric grease to the
socket and install the new lamp.
7. Reinstall the harness connector.
8. Test the light for proper operation.
9. Reinstall the taillight assembly.
10. Reinstall the two screws.
Harness
Screws
Lamp