Polaris 450 MXR Offroad Vehicle User Manual


 
81
Operation
Driving Through Water
NOTICE: Serious engine damage can result if the vehicle is not thoroughly inspected after operating
in water deeper than the footpeg level. As soon as possible, perform the inspections and
maintenance services outlined in the periodic maintenance chart beginning on page 87.
Engine oil and all grease fittings need special attention.
If the vehicle tips or overturns in water, or if the engine stops during or after operating in
water, restarting can result in serious engine damage. Transport the vehicle to your dealer
for service before restarting the engine. If this is not possible, follow the vehicle immersion
inspection and drying procedures outlined on page 126, then see your dealer for service at
the first opportunity.
4. After leaving water, test the brakes. Apply them lightly several times while driving. The
friction will help dry out the pads.
If it’s unavoidable to enter water deeper than the footpeg level:
Proceed slowly. Avoid rocks and obstacles.
Balance your weight carefully. Avoid sudden movements.
Maintain a steady rate of speed. Do not make sudden turns or stops. Do not make sudden
throttle changes.